ADTRAN AOS Version R10.1.0 Command Reference Manual page 1873

Command Reference Guide
isdn name-delivery
Use the isdn name-delivery command to control the delivery of the name associated with the primary rate
interface (PRI). This command can be used to block the caller ID name on the PRI. Use the no form of this
command to return to the default setting. Variations of this command include:
isdn name-delivery display
isdn name-delivery proceeding
isdn name-delivery setup
Syntax Description
display
proceeding
setup
Default Values
By default, isdn name-delivery is disabled.
Command History
Release 11.1
Release 14.1
Usage Examples
The following example configures the calling party information to be delivered in the setup message:
(config)#interface pri 2
(config-pri 2)#isdn name-delivery setup
60000CRG0-35E
Delivers the calling party's name in a display information element (IE) in the
SETUP message.
Delivers the calling party's name in a facility IE after the PROCEEDING
message.
Delivers the calling party's name in a facility IE in the SETUP message.
Command was introduced.
Command was updated.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1873