ADTRAN AOS Version R10.1.0 Command Reference Manual page 1843

Command Reference Guide MEF Ethernet Interface
Functional Notes
Individual LLDP information can be enabled or disabled using the various forms of the lldp send
command. For example, use the lldp send-and-receive command to enable transmit and receive of all
LLDP information. Then use the no lldp send port-description command to prevent LLDP from
transmitting port description information.
Usage Examples
The following example configures the MEF Ethernet interface 0/1 to transmit LLDP packets containing all
enabled information types:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#lldp send
The following example configures the MEF Ethernet interface 0/1 to transmit and receive LLDP packets
containing all enabled information types:
(config)#interface mef-ethernet 0/1
(config-mef-ethernet 0/1)#lldp send-and-receive
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1843