ADTRAN AOS Version R10.1.0 Command Reference Manual page 1927

Command Reference Guide T1 Interface Command Set
snmp trap threshold-reached
Use the snmp trap threshold-reached command to control the Simple Network Management Protocol
(SNMP) variable adGenAOSDs1ThresholdReached (adGenAOSDs1-Ext MIB) to enable the interface to
send SNMP traps when a DS1 performance counter threshold is reached. Use the no form of this command
to disable this trap.
Syntax Description
No subcommands.
Default Values
By default, the adGenAOSDs1ThresholdReached object identifier (OID) is disabled for all interfaces.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example disables SNMP threshold reached trap on the T1 interface:
(config)#interface t1 1/1
(config-t1 1/1)#no snmp trap threshold-reached
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1927