ADTRAN AOS Version R10.1.0 Command Reference Manual page 1869

Command Reference Guide
connect t1 <slot/port> tdm-group <number>
Use the connect t1 tdm-group command to configure the time division multiplexing (TDM) group
connection used for the primary rate interface (PRI). Use the no form of this command to return to the
default value.
Syntax Description
<slot/port>
<number>
Default Values
By default, the command is disabled.
Command History
Release 11.1
Usage Examples
The following example configures the unit to connect tdm-group 1 of the T1 to the PRI:
(config)#interface pri 2
(config-pri 2)#connect t1 1/1 tdm-group 1
60000CRG0-35E
Configure the T1 interface identifier.
Configure the TDM group number. Valid range is 1 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PRI Interface Command Set
1869