Command Reference Guide
SHDSL Interface Command Set
inband-detection
Use the inband-detection command to enable inband loopback pattern detection on the single-pair
high-speed digital subscriber line (SHDSL) interface. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command History
Release 4.1
Command was introduced.
Usage Examples
The following example disables inband loopback pattern detection:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#no inband-detection
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1901