ADTRAN AOS Version R10.1.0 Command Reference Manual page 1904

Command Reference Guide
line-mode
Use the line-mode command to select the controller line mode. Use the no form of this command to return
to the default setting. Variations of this command include:
line-mode 2-wire
line-mode 4-wire
Syntax Description
2-wire
4-wire
Default Values
By default, the digital subscriber line (DSL) operating mode is set to 2-wire.
Command History
Release 15.1
Usage Examples
The following example sets the line mode to 4-wire:
(config)#interface shdsl 1/1
(config-shdsl 1/1)#line-mode 4-wire
60000CRG0-35E
Specifies two-wire mode.
Specifies four-wire mode for extended operation.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SHDSL Interface Command Set
1904