ADTRAN AOS Version R10.1.0 Command Reference Manual page 1942

Command Reference Guide
test-pattern
Use the test-pattern command to activate the built-in pattern generator and begin sending the selected test
pattern toward the network. This pattern generation can verify a data path when used in conjunction with
an active loopback. Use the no form of this command to cease pattern generation. Variations of this
command include:
test-pattern clear
test-pattern errors
test-pattern insert
test-pattern ones
test-pattern p215
test-pattern p223
test-pattern zeros
Syntax Description
clear
errors
insert
ones
p215
p223
zeros
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Usage Examples
The following example enables a p215 test pattern:
(config)#interface t3 1/1
(config-t3 1/1)#test-pattern p215
60000CRG0-35E
Clears the test pattern error count.
Displays the test pattern error count.
Inserts an error into the currently active test pattern.
Generates a test pattern of continuous ones.
Generates a pseudorandom test pattern sequence based on a 15-bit shift
register.
Generates a pseudorandom test pattern sequence based on a 23-bit shift
register.
Generates a test pattern of continuous zeros.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T3 Interface Command Set
1942