ADTRAN AOS Version R10.1.0 Command Reference Manual page 1951

Command Reference Guide ATM Subinterface Command Set
atm routed-bridged ip
Use the atm routed-bridged ip command to enable IP routed bridge encapsulation (RBE) on an interface.
Use the no form of this command to disable RBE operation.
Syntax Description
No subcommands.
Default Values
By default, RBE is disabled.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example enables RBE:
(config)#interface atm 1.1
(config-atm 1.1)#atm routed-bridged ip
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1951