ADTRAN AOS Version R10.1.0 Command Reference Manual page 1938

Command Reference Guide
loopback network
Use the loopback network command to initiate a local T3 loopback on the interface toward the network.
Use the no form of this command to deactivate the loopback. Variations of this command include:
loopback network line
loopback network payload
Syntax Description
line
payload
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Usage Examples
The following example initiates a payload loopback of the T3 interface:
(config)#interface t3 1/1
(config-t3 1/1)#loopback network payload
60000CRG0-35E
Initiates a loopback of the physical T3 network interface; that is, data
received on the T3 is transmitted back out on the T3.
Initiates a loopback of the T3 framer (TSU portion) of the T3 network
interface.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T3 Interface Command Set
1938