ADTRAN AOS Version R10.1.0 Command Reference Manual page 1940

Command Reference Guide T3 Interface Command Set
remote-loopback
Use the remote-loopback command to configure the T3 interface to be looped from the far end (remote
device, Telco, etc.). Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, all interfaces respond to remote loopbacks.
Command History
Release 6.1 Command was introduced.
Usage Examples
This example enables remote loopbacks on the T3 interface:
(config)#interface t3 1/1
(config-t3 1/1)#remote-loopback
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1940