Command Reference Guide
line-length
Use the line-length command to configure the line length for a T3 physical interface. Use the no form of
this command to return to the default value. Variations of this command include:
line-length long
line-length short
Syntax Description
long
short
Default Values
By default, all T3 interfaces are configured for a short line length.
Command History
Release 6.1
Usage Examples
The following example configures the T3 interface for long line length:
(config)#interface t3 1/1
(config-t3 1/1)#line-length long
60000CRG0-35E
Configures the line length for a distance of 225 to 450 feet of cable.
Configures the line length for a distance of 0 to 225 feet of cable.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
T3 Interface Command Set
1937