Acronyms And Abbreviations; Reference Documents - STMicroelectronics SPC572L series Reference Manual

Preface
Convention
Depending on its placement in the read or write row, indicates that the bit is not readable or not
writable.
FIELDNAME Identifies the field. Its presence in the read or write row indicates that it can be read or written.
R Read only. Writing this bit has no effect.
W Write only
R/W Standard read/write bit. Only software can change the bit's value (other than a hardware reset).
rwm A read/write bit that may be modified by a hardware in some fashion other than by a reset.
w1c Write one to clear. A status bit that can be read, and is cleared by writing a one.
slfclr Self-clearing bit. Writing a one has some effect on the module, but it always reads as zero.
0 Resets to zero
1 Resets to one
— Undefined at reset
u Unaffected by reset
[signal_name] Reset value is determined by polarity of indicated signal.
1.5

Acronyms and abbreviations

Appendix A: Acronyms and abbreviations
document.
1.6

Reference documents

In addition to this reference manual, the following documents provide additional information
on the operation of the SPC572Lx:
•
IEEE-ISTO 5001-2003 Standard for a Global Embedded Processor Interface (Nexus)
•
IEEE 1149.1-2001 standard - IEEE Standard Test Access Port and Boundary-Scan
Architecture
92/2058
Table 1. Register conventions
Description
Register field types
Reset values
lists acronyms and abbreviations used in this
DocID027809 Rev 4
RM0400