ADTRAN AOS Version R10.1.0 Command Reference Manual page 1954

Command Reference Guide
cos
Use the cos command to define class of service (CoS) settings on an asynchronous transfer mode (ATM)
subinterface. Use the no form of this command to remove the parameters. Variations of this command
include:
cos ubr
cos vbr-nrt <pcr> <scr> <mbs>
cos vbr-rt <pcr> <scr> <mbs>
Syntax Description
ubr
vbr-nrt
vbr-rt
<pcr>
<scr>
<mbs>
Default Values
The default setting for this feature is cos ubr.
Command History
Release 17.2
Usage Examples
The following example defines variable bit rate real time on the ATM subinterface 1.2:
(config)#interface atm 1.2 point-to-point
(config-atm 1.2)#no shutdown
(config-atm 1.2)#pvc 1/101
(config-atm 1.2)#ip address 10.23.107.35 255.255.255.240
(config-atm 1.2)#COS VBR-rt 2304 1024 3
(config-atm 1.2)#bandwidth 2304
60000CRG0-35E
Indicates unspecified bit rate (UBR) for the CoS.
Specifies the variable bit rate (VBR) nonreal time (NRT) peak cell rate
(PCR), sustained cell rate (SCR), and maximum burst size (MBS).
Specifies the variable bit rate real time (RT) peak cell rate, sustained cell
rate, and maximum burst size.
Indicates the peak cell rate or maximum number of cells per second the
connection can transfer into the network. Valid range is 32 to 50000 kbps.
Indicates the sustained cell rate or average number of cells per second that
the connection can transfer into the network. Valid range is 32 to
50000 kbps.
Indicates the maximum burst size of cells allowed on the connection. Valid
range is 3 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
1954