ADTRAN AOS Version R10.1.0 Command Reference Manual page 1960

Command Reference Guide
dial-backup backup-delay <value>
Use the dial-backup backup-delay command to configure the amount of time the router will wait after the
failure condition is recognized before attempting to backup the link. Use the no form of this command to
return to the default value. For more detailed information on dial-backup functionality, refer to the
Functional Notes and Technology Review sections of the command
Syntax Description
<value>
Default Values
By default, the dial-backup backup-delay period is set to 10 seconds.
Command History
Release 1.1
Release 8.1
Usage Examples
The following example configures AOS to wait 60 seconds (on an endpoint with an active alarm condition)
before attempting dial-backup operation:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup backup-delay 60
60000CRG0-35E
Specifies the delay period (in seconds) a failure must be active before AOS
will enter backup operation on the interface. Valid range is 10 to
86400 seconds.
Command was introduced.
Asynchronous transfer mode (ATM) subinterface was added.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
dial-backup call-mode on page 1961.
1960