ADTRAN AOS Version R10.1.0 Command Reference Manual page 1971

Command Reference Guide
dial-backup redial-delay <value>
Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call
will be re-tried. Use the no form of this command to return to the default setting. For more detailed
information on dial-backup functionality, refer to the Functional Notes and Technology Review sections of
the command dial-backup call-mode on page
Syntax Description
<value>
Default Values
By default, the dial-backup redial-delay period is set to 10 seconds.
Command History
Release 1.1
Release 8.1
Usage Examples
The following example configures a redial delay of 25 seconds on this endpoint:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup redial-delay 25
60000CRG0-35E
1961.
Specifies the delay (in seconds) between attempting to redial a failed
backup attempt. Valid range is 10 to 3600 seconds.
Command was introduced.
Asynchronous transfer mode (ATM) subinterface was added.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
1971