ADTRAN AOS Version R10.1.0 Command Reference Manual page 1966

Command Reference Guide
dial-backup force
Use the dial-backup force command to manually override the automatic dial-backup feature. This can be
used to force a link into backup to allow maintenance to be performed on the primary link without
disrupting data. Use the no form of this command to return to the normal dial-backup operation state. For
more detailed information on dial-backup functionality, refer to the Functional Notes and Technology
Review sections of the command
include:
dial-backup force backup
dial-backup force primary
Syntax Description
backup
primary
Default Values
By default, this feature is disabled.
Command History
Release 1.1
Release 8.1
Usage Examples
The following example configures AOS to force this endpoint into dial backup:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup force backup
60000CRG0-35E
dial-backup call-mode on page
Forces backup regardless of primary link state.
Forces primary link regardless of its state.
Command was introduced.
Asynchronous transfer mode (ATM) subinterface was added.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
1961. Variations of this command
1966