Resetting The Configuration; Regenerating The Configuration - Auerswald COMpact 4000 Operation Manual

Service and Maintenance
Backing Up and Recovering Configuration Data

Resetting the Configuration

Resetting the Configuration
When resetting the configuration, the following parameters are maintained—in contrast to a
reset to the ex-factory state via the buttons:
• Admin user name, admin PIN and admin password
• IP address settings
• Web server port setting
• Time
• NTP server settings
• Dealer/operator data
• Saved hold music and announcements
• Call data
• System messages
Proceed as follows:
• Using the configuration manager
1. Open the page Administration > Data backup.
2. Click Reset under RESET CONFIGURATION.
3. Click Yes.
The configuration is reset.
4. Click OK.

Regenerating the Configuration

When regenerating the configuration, the configuration data is read out of the PBX. The
database is reset, and the configuration data is restored to the PBX once more. This eliminates
internal errors the configuration data may contain. The configuration of the PBX remains
unchangend.
716
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016