Auerswald COMpact 4000 Operation Manual page 576

Settings
ISDN Connection
PTP Connection Settings
CLIP no screening
Requirements:
• CLIP no screening service feature supported and enabled by the network provider
The exchange line transfers the customer-specific phone number (e.g. a service phone
number) entered in Phone number for CLIP no screening to the call destination without
checking that this number is correct.
Notes:
In Germany, some network providers only offer this service feature for PTP
connections.
When an emergency number is dialled, the phone number received from the
network provider is always transmitted, not the phone number you specified
yourself.
However, the correct phone number is also still transferred to the exchange
line, but this cannot be viewed by the person being called.
CLIP no screening must be enabled for every connection to ensure that the
phone number for CLIP no screening is transmitted instead of the phone
number received from the network provider.
Use CLIP no screening for call forwarding
Requirements:
• CLIP no screening switched on for the ISDN connection
If a call is forwarded via the external connection, the caller's phone number is sent to the
destination of the forwarded call.
The PBX's phone number is sent to the destination of the forwarded call.
MISCELLANEOUS
GSM
The S port supports the GSM gateway connected to it. Any phone numbers can be used
0
for the connection. They must be entered in the PBX and GSM gateway configurations.
576
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016