Wake-Up Functions; Settings For Wake-Up Functions - Auerswald COMpact 4000 Operation Manual

Wake-up Functions

To be reminded of one-time or recurring appointments, every user can configure different wake-
up times for his telephone.
Proceed as follows for configuration:
• Making settings for wake-up calls.
– Using the configuration manager (page Functions > Wake-up times)
• Configuring wake-up times and switching wake-up on/off.
– Using the configuration manager (page Functions > Wake-up times)
– Using a character string on the internal telephone (see section Short Reference)
• Managing and assigning audio files for announcements.
– Using the configuration manager (on the following pages)
– Functions > Music on Hold/Announcements > File management
– Functions > Music on Hold/announcements > File assignment > wake-up
announcements
– Using a character string on the internal telephone (see section Short Reference)
• Creating switching times for switching the wake-up announcement.
– Using the configuration manager (page Time control > Switching times)

Settings for Wake-Up Functions

Proceed as follows:
• Using the Configuration Manager (Page Functions > Alarm wake-up times)
SETTINGS
Maximum number of wake-up call attempts per wake-up time
Specifies how often a wake-up call is made during each wake-up time. When a wake-up call is
acknowledged, the wake-up process for each wake-up time is interrupted.
Call duration of a wake-up call (30 to 120 sec.)
Specifies how long an individual wake-up call is played on an end device.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Functions
Wake-up Functions
Settings for Wake-Up Functions
515