Auerswald COMpact 4000 Operation Manual page 656

Settings
Emergency Calls
Configuring the Modem/Fax Call Distribution for Analogue Connections
– Public switched tel. networks > Voice over IP (VoIP) > Accounts > Configure
• Set up emergency calls.
– Using the Configuration Manager (page Public switched tel. networks > Emergency
calls)
Note: Public emergency numbers are set as default settings when you select
the country settings (using the configuration wizard), when commissioning
the PBX. These numbers cannot be deleted. You can only enter different
public emergency numbers as default settings by changing the country
settings at a later point in time. Be aware of any possible conflicts between
the country-specific emergency numbers and the existing internal telephone
numbering plan. If necessary, assign new "Internal numbers".
• If necessary, set the country in which the PBX is operating.
– Using the Configuration Manager (Administration > Dealer/operator data page)
• Input your own emergency numbers.
– Using the Configuration Manager (Public switched tel. networks > Emergency calls
page)
• If necessary, input service numbers.
– Using the Configuration Manager (Public switched tel. networks > Emergency calls
> Service numbers page)
• Configure exchange line authorisations.
– Using the Configuration Manager (on the pages that follow)
– Subscriber (scr.) > Properties > Exchange line settings
– Groups > Properties > Exchange line settings
• Manage and assign audio files for announcements.
– Using the Configuration Manager (on the pages that follow)
– Functions > Music on Hold/Announcements > File management
– Functions > Music on Hold/Announcements > File assignment > Music on Hold/
Alarm
– Using a character string on the internal telephone (see Short reference section)
Note: The PBX is supplied with announcements in English and German. You
can create other announcements in the local language at a later point in time.
656
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016