Entering The Delay Time For Baby Call - Auerswald COMpact 4000 Operation Manual

Functions
Baby Call

Entering the Delay Time for Baby Call

• For user: Subscriber Properties > Settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Baby call (connection without dialling) check box.
Enables baby call.
Disables baby call. (No other action is required.)
4. If you have enabled baby call, enter the destination number in the Destination
number entry field under Baby call (connection without dialling). Possible entries:
External number
Short-code number
Internal number of the individual telephone
Internal number of the line group
Entering the Delay Time for Baby Call
The delay time for baby call determines the time in seconds, after which the destination number
is dialled automatically after picking up the receiver.
Proceed as follows:
• Using the configuration manager
1. Open the page Settings > Basic settings.
2. In the Delay time for baby/senior call entry field under SUBSCRIBER SETTINGS,
enter a value. Possible entries:
1 to 20: After 1 to 20 seconds, the destination number is dialled automatically
after picking up the receiver.
316
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016