Auerswald COMpact 4000 Operation Manual page 646

Settings
Call Distribution
Creating a Call Distribution
8. Repeat step 2 to 7 to configure the call distribution for other configurations (PBX
profiles).
Switching Linear Call Distribution on the PTP Connection On/Off
If the linear call distribution for the PTP connection is enabled, a 1:1 assignment for the exten-
sions is made automatically for internal numbers and external extensions that are matching the
extensions block.
Requirements:
• External S port, VoIP account (optional, see chapter Important Information > Product
0
Details > Basic Assembly and Extensions)
• Configured connection type PTP connection
• Entered PBX base numbers with corresponding extensions blocks
1. Open the page Public switched tel. networks > Call distribution.
If several configurations (PBX profiles) have been created, these will be available as
tabs.
2. With several configurations: Click the tab with the desired configuration.
3. In the first CALL DISTRIBUTION FOR... list field, select ISDN PTP connections or
VoIP PTP connections.
4. In the second CALL DISTRIBUTION FOR... list field, select the connection.
5. Select or clear the Linear call distribution (external = internal) check box.
6. Click Save.
7. Repeat step 4 to 6 to switch on/off linear call distribution for the other PTMP connec-
tions.
8. Repeat step 2 to 7 to switch on/off linear call distribution for other configurations (PBX
profiles).
646
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016