Lcr - Auerswald COMpact 4000 Operation Manual

LCR

LCR (Least Cost Routing) is a function of the PBX that enables the subscriber to automatically
make calls using the most cost-effective telephone service provider. The PBX determines the
telephone service provider to be used by the dialled phone number and the configured tariff
tables.
Note:
Automatic LCR is not carried out for the entered emergency numbers (Public
switched tel. networks > Emergency calls).
If a call is initiated via a targeted exchange line access, automatic LCR is not
carried out.
Requirements:
• Support of dial-around service by the network provider
Proceed as follows for configuration:
• Switching LCR at the external connection on.
– Using the configuration manager (on the following pages)
– Public switched tel. networks > ISDN connections > PTMP connection
– Public switched tel. networks > ISDN connections > PBX base numbers/trunk
bundles > Configure
– Public switched tel. networks > Analogue connections
– Public switched tel. networks > Voice over IP (VoIP) > Accounts > Configure
• Selecting the subscribers on which automatic LCR should be carried out.
– Using the configuration manager (page Routing > Soft-LCR 4.0 > LCR subscriber)
• If necessary, switching LCR for Call Through calls on.
– Using the configuration manager (page Functions > Call Through)
• Creating LCR data and keeping them up to date.
– Using the configuration manager (on the following pages)
– Routing > Soft-LCR 4.0 > Provider
– Routing > Soft-LCR 4.0 > Networks/LCR import
– Routing > Soft-LCR 4.0 > LCR tables
• Creating the holidays in the calendar of the PBX and switching them on for LCR.
– Using the configuration manager (page Functions > Calendar)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Performing Loudspeaker Announcement
Functions
LCR
381