Entering E-Mail Addresses Of Message Recipients For Voice Mailbox - Auerswald COMpact 4000 Operation Manual

Voice Mail and Fax Boxes
Voice Mailbox

Entering E-Mail Addresses of Message Recipients for Voice Mailbox

Note: If you have cleared this check box, the e-mails will be sent in text
format.
5. Select or clear the Send on incoming message check box under E-mail transfer.
6. Enabled Send on incoming message: Select or clear the Attach incoming
message as file check box under E-mail transfer.
Note: Voice messages are provided as audio files (*.wav).
7. Enabled Send on incoming message: Select or clear the Mark sent messages as
read check box under E-mail transfer.
8. Select or clear the Send on ... check box under E-mail transfer.
9. Enabled Send on ...: Enter a value in the ... memory utilisation entry field. Possible
entries:
50 to 95
10. Select or clear the Send in the case of failure of automatic clean-up check box
under E-mail transfer.
Entering E-Mail Addresses of Message Recipients for Voice Mailbox
The e-mail addresses of up to 10 message recipients can be entered for e-mail transfer. Subse-
quently, a test e-mail can be sent to check whether the e-mail transfer to the message recip-
ients entered works without fault.
Proceed as follows:
• Using the configuration manager
Requirements:
• Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
• Configured DNS server (under Administration > IP configuration)
• Configured outgoing mail server (under Administration > E-mail > Outgoing mail server)
230
percent
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016