Fax Box; Configuring A Fax Box - Auerswald COMpact 4000 Operation Manual

Fax Box

A fax box accepts incoming faxes and saves them as *.pdf files. The maximum length of a fax
is 50 pages.
The basic assembly does not include a fax box. By activation in the Upgrade-Center, the PBX
can, however, be expanded by a fax box . It is then capable to send or receive one telefax at a
time.
The fax receiving function is supported with maximally 9.6 kbps (V.29).

Configuring a Fax Box

Requirements:
• Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
1. Create a fax box. Here, the fax box is assigned a number and a name. If required, an
owner is assigned.
2. Configure the Maximum recording capacity for the fax box.
3. If required, enable Automatic clean-up.
4. If required, configure further properties (E-mail transfer on incoming fax, in the case
of full memory, in case of failure of automatic clean-up, or after fax transfer, Fax ID for
the fax transfer).
5. If required, select further users for the fax box and enable or disable their authorisa-
tions (Administrate settings).
6. If required, assign a profile to the fax box.
7. Only if no profile has been assigned to the fax box (default settings of the standard
profile) or if settings have been made in the profile which can be enabled by the user
(not Profile-controlled settings):
Configure Call acceptance (Reject anonymous fax calls) for the fax box.
8. If required, configure Readiness permanently for the fax box.
9. If required, configure external call distribution for the fax box (Public switched tel.
networks > Call distribution).
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Voice Mail and Fax Boxes
Fax Box
Configuring a Fax Box
255