Technical Data - Auerswald COMpact 4000 Operation Manual

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power consumption
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
Connection Options on the Basic Unit
VoIP internal/external, PC and
LAN
Printer or data storage device 1 USB host port
ISDN internal/external
Analogue internal
Connection Options on the COMpact 2BRI Module
ISDN internal/external
Connection Options on the COMpact 2FXO Module
Analogue external
Internal Analogue Port
Connection unit
Type of dialling
Open-circuit voltage
Loop current
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
230 VAC +/-10 %, 50 Hz
max. 0.5 A
I
min. 6 W, max. 48 W
(depending on the configuration level of the PBX)
Power supply from the PBX
0 to +40 °C
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70 °C
10 to 90 %, non-condensing
1 Ethernet port
4 ISDN ports, optionally switchable as an external S
internal S port and internal U
0
8 a/b ports
2 ISDN ports with 2 RJ-45 sockets each, optionally
switchable as an external S
internal U port (jumper)
P0
2 external analogue ports
Spring clamp connection (2-core)
Pulse or tone dialling
Max. 40 VDC
Approx. 23 mA
Important Information
Configuration and Administration
port (jumper)
P0
port, internal S port and
0 0
Technical Data
port,
0
45