Remote Configuration Settings - Auerswald COMpact 4000 Operation Manual

Service and Maintenance
Remote Configuration and Alternative Connection Options

Remote Configuration Settings

Remote Configuration Settings
Proceed as follows:
• Using the Configuration Manager (page Settings > Remote configuration)
REMOTE CONFIGURATION AND REMOTE PROGRAMMING
External PIN
The external PIN is required for the following purposes:
• As a PIN for remote programming from an external telephone (e.g. for enabling remote
configuration or switching the alarm on/off)
Notes:
To change an existing PIN, click on
All the PINs in the PBX are unique. For this reason, you cannot assign the
same PIN twice.
Do not use dates of birth or dates as PINs. This makes it easy for an attacker
to find out the correct PIN. Do not use PINs which are easy to guess, such as
111111 or 123456.
Remote switching number call no:
Requirements:
• External numbers have been entered
---: no remote switching number.
The remote switching number is required for the following purposes:
• As a PBX phone number for remote programming from an external telephone (e.g. for
enabling remote configuration or switching the alarm on/off)
Notes:
If no remote switching number has been entered, you must dial a character
string on an internal telephone to unlock the PBX for remote configuration.
After this, the PBX can be accessed via every associated MSN/DDI number.
726
Caution: Visible PINs are a security risk.
• After you enter your PIN, click on
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Edit PIN.
Hide PIN.