Auerswald COMpact 4000 Operation Manual page 224

Voice Mail and Fax Boxes
Voice Mailbox
Creating Voice Mailboxes
Requirements:
• Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
• The number range for the phone numbers of the boxes is still free.
1. Open the page Devices > Voice mail/fax boxes > Phone numbers.
2. Click New.
3. In the Box type list field, select the Voice mailbox option.
4. Create box(es):
• Single box: In the from entry field, enter the desired box number.
• Several boxes: Enter the lowest phone number of the number range into the
from entry field and highest phone number into until the entry field.
Possible entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers requiring more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 will no longer be available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
5. If required, enter a name for identification purposes in the Name entry field.
Note: The name is shown on further pages of the configuration in addition to
the phone number.
6. In the Based on list field, select a template from all boxes created so far.
Template: The new box obtains all properties of the selected template during
creation (except Users/authorisations, PIN for remote access, and
Announcements).
Standard: The Basic settings are used for the box just created.
224
10 to 9999
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016