Switching The Call Restrictor (Incoming) On/Off For Group - Auerswald COMpact 4000 Operation Manual

Functions
Call Restrictor (Incoming) – Robinson Numbers

Switching the Call Restrictor (incoming) On/Off for Group

4. If you have enabled a call restrictor, select the call restrictor you want in the Call
restrictor (incoming) list field.
Switching the Call Restrictor (incoming) On/Off for Group
If a call restrictor is enabled, in a group call, a caller, who transmitted one of the phone numbers
entered in the call restrictor or no number, is rejected.
Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call restrictor
1. Open the page Groups > Properties > Reachability.
2. In the list field at the top, select the group in question by its name or number.
3. In the Call Restrictor (incoming) list field select one of the following options:
No: No call restrictor is used for incoming external calls.
[Call restrictor name]: The call restrictor selected in the list field is used for
incoming external calls.
Like subscriber: The call restrictor selected for a subscriber is used for
incoming external calls.
470
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016