Auerswald COMpact 4000 Operation Manual page 602

Settings
VoIP
VoIP Provider Settings
The provider has emergency call ability
Requirements:
• the associated VoIP provider must allow emergency calls
It is possible to make an emergency call using this provider and the account assigned to
them.
This provider does not support emergency calls. When you attempt to dial an emergency
number, you will hear the announcement, "This telephone does not allow emergency calls.
Please use an alternative."
NUMBER PRESENTATION (OUTGOING)
Format of called phone number
Format in which the VoIP provider requires the phone number of the destination, to enable the
VoIP provider to transfer the call.
Country code with leading zeroes: The destination phone number is transmitted from the
PBX to the VoIP provider with the entire country code (e.g. 0044).
Country code with leading + sign: The destination phone number is transmitted from the
PBX to the VoIP provider with the entire country code in mobile telephony format (e.g. +44).
Country code without leading zeroes: The destination phone number is transmitted from the
PBX to the VoIP provider with a shortened country code, without the international prefix (digit),
(e.g. 44).
Without country code: The destination phone number is transmitted from the PBX to the VoIP
provider without its own country code but with the local area code (e.g. 05306).
Send as dialled: The PBX transmits the destination phone number to the VoIP provider, as
dialled.
Notes:
The PBX automatically converts the phone numbers dialled into this format
for calls made via the VoIP provider.
If prefixes are necessary for conversion, for dialling a number without
prefixes, the prefixes set for the account are used (Public switched tel.
networks > Voice over IP (VoIP) > Accounts > Configure).
602
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016