Switching Call Forwarding For Subscribers For Group Calls On/Off - Auerswald COMpact 4000 Operation Manual

Functions
Call Forwarding

Switching Call Forwarding for Subscribers for Group Calls On/Off

• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber Properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Cascading check box under Settings.
Switching Call Forwarding for Subscribers for Group Calls On/Off
If call forwarding is enabled also for group calls, calls directed to a group in which the subscriber
is logged in as incoming will be forwarded to the CF destination of the subscriber.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber Properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the CF on group call check box under Settings.
452
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016