Creating Default Networks Based On A Provider Area Code; Creating Networks Manually For Soft-Lcr 4.0 - Auerswald COMpact 4000 Operation Manual

Functions
LCR

Creating Default Networks Based on a Provider Area Code

Creating Default Networks Based on a Provider Area Code
The tariff groups City, Region, National and International can automatically be created based
on the local area code. They include the data for the Area code/Area code range.
Caution: When networks are automatically created, the existing LCR data
are deleted.
Proceed as follows:
• Using the configuration manager
Requirements:
• A configured local area code
1. Open the page Routing > Soft-LCR 4.0 > Networks/LCR import.
2. Click Create under CREATE LCR NETWORKS AUTOMATICALLY WITH HELP OF
THE AREA CODE.
3. Click Yes.
4. Click OK.
Further steps:
• Enter the tariff information in the LCR tables.

Creating Networks Manually for Soft-LCR 4.0

Up to 60 networks can be generated.
Note: LCR networks and the corresponding LCR prefixes (Area codes/Area
code ranges) can automatically be created based on the local area code
(CREATE LCR NETZWORKS AUTOMATICALLY WITH HELP OF THE
AREA CODE).
384
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016