Restarting The Tapi Server; Checking The Function Of The Lan-Tapi - Auerswald COMpact 4000 Operation Manual

Functions
LAN-TAPI

Restarting the TAPI Server

2. Follow the installation by clicking Next.
3. Depending on the driver version, the driver may need to be activated at this point. If
you do not want to activate it yet, click the Activate later button.
4. In the IP address of the PBX entry field, enter the IP address of the PBX. Enter the
network port of the TAPI server in the Port entry field. Enter the password for the
network connection of the TAPI server in the Password and Repeat password entry
fields. Click OK.
5. Click Close.
6. Restart the PC.
Restarting the TAPI Server
Proceed as follows:
• Using the configuration manager
1. Open the page Functions > LAN TAPI.
2. Click Restart under Restart TAPI server.

Checking the Function of the LAN-TAPI

To perform a simple function check of the TAPI driver (TSP) as well as the settings configured
in the PBX, use the dialling help on Windows on the server PC.
Proceed as follows:
• Using the server PC
Checking the Function of the LAN-TAPI on Windows 7/Windows 8/8.1
Requirements:
• A completed TAPI drive installation on the server PC
374
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016