Switching Authorisation For Call Parking On/Off; Configuring The Internal Base Telephone Number For The Parking Zone - Auerswald COMpact 4000 Operation Manual

Functions
Call Parking

Switching Authorisation for Call Parking On/Off

2. Dial ##06.
3. Enter the internal base number. Possible entries:
Internal base number for the parking zone
Direct exchange line telephone: with preceding **)
4. Dial the number of the park position. Possible entries:
0 to 9
You are conducting a query call with the waiting caller.
Switching Authorisation for Call Parking On/Off
If the authorisation for call parking is enabled, the subscriber in question can park a caller in the
parking zone or retrieve a waiting caller from the parking zone.
Proceed as follows:
• Separately for subscribers
• Using the configuration manager
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call Parking check box.

Configuring the Internal Base Telephone Number for the Parking Zone

The internal base number is a phone number taken from the internal numbering plan. When
put together with the ten possible park positions 0-9, this creates ten 3 to 4-digit phone
numbers. These numbers can then be used to select the parking zone for call parking.
Proceed as follows:
• Using the configuration manager
1. Open the page Functions > Call parking.
392
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
(for exchange line request type