Auerswald COMpact 4000 Operation Manual page 299

Private (Personalised) Exchange Line Access > Switching Differently Config-
urable Functions for Private and Business Calls On/Off).
• Separately for configurations
• For the exchange line transfer function (Settings > Basic settings > EXCHANGE LINE
CALL TRANSFER > Exchange line settings for the manually switched exchange line
access > Configure special exchange line settings > Configure)
• For the Call Through function (Functions > Call Through > EXCHANGE LINE SETTINGS
> Configure)
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• For exchange line-dependent settings: external numbers have been entered
1. Open the page Subscriber (scr.) > Properties > Exchange line settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Exchange line authorisation business and Exchange line authorisation
private or Exchange line authorisation list fields, select one of the following
options:
International: All international and domestic numbers can be dialled.
National: All domestic numbers can be dialled.
City: All phone numbers without a provider area code can be dialled.
Only incoming, with emergency call: Emergency numbers can be dialled,
and incoming external calls can be accepted.
Only internal, with emergency call: Emergency numbers can be dialled, but
no incoming external calls can be accepted.
Internal only, no emergency calls: No external calls can be made.
Exchange line dependent: The exchange line authorisation is configured
separately for each individual external connection.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Exchange Line Authorisation
Configuring Exchange Line Authorisation for Subscribers
Functions
299