Auerswald COMpact 4000 Operation Manual page 388

Functions
LCR
Creating Tariff Information for Networks for Soft-LCR 4.0
The Price per connection refers to the currency entered in the PBX
(Functions > Call allowance accounts under CHARGE).
9. In the Price per minute entry fields under Main provider, 1st fallback provider and
2nd fallback provider, enter the corresponding values. Possible entries:
Price in the 00.0000 format: Specifies the price per minute from 0.0000 to
99.9999.
Digits and the separator
Note:
The PBX uses Price per minute for internal calculations and display
purposes during calls that are initiated by an LCR subscriber and perhaps a
Call Through user and routed via the corresponding provider.
The Price per minute refers to the currency entered in the PBX (Functions
> Call allowance accounts under CHARGE).
10. In the Meter pulse interval (1st pulse) entry fields under Main provider, 1st
fallback provider and 2nd fallback provider, enter how many seconds the provider
assigns the first meter pulse after the connection has been established (after
CONNECT). Possible entries:
1 to 6000
Note: This meter pulse is fully billed by the provider even if the call is ended
before this time has elapsed.
11. In the Second pulse) entry fields under Main provider, 1st fallback provider and
2nd fallback provider, enter which charge pulse time unit is used to bill a call after
the first meter pulse. Possible entries:
1 to 6000
Note:
For second pulses of differing lengths, enter the most unfavourable meter
pulse.
The provider bills each started meter pulse in full.
12. Click Save.
13. Repeat steps 2 to 12 to create additional entries.
388
,
sec.: Specifies the first meter pulse from 1 to 6000 seconds.
sec.: Specifies the second pulse from 1 to 6000 seconds.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016