Creating A Call Restrictor (Outgoing) - Auerswald COMpact 4000 Operation Manual

1. Open the page Groups > Properties > Exchange line settings.
2. In the list field at the top, select the group in question by its name or number.
3. In the Call restrictor (outgoing) list field select one of the following options:
No: No call restrictor is used for outgoing external calls.
[Call restrictor name]: The call restrictor selected in the list field is used for
outgoing external calls.
Like subscribers: The call restrictor selected for a subscriber is used for
outgoing external calls.

Creating a Call Restrictor (Outgoing)

Ten call restrictors with a maximum of 100 phone numbers/ranges total can be configured
(e.g., 10 call restrictors, each with 10 phone numbers or 5 call restrictors, each with 20 phone
numbers).
Proceed as follows:
• Using the configuration manager
1. Open the page User data > Special numbers.
2. Click New.
3. Select Call Restrictor (outgoing) in the list field.
4. Enter the name of the call restrictor in the Name entry field.
5. Click Save.
6. Click Configure.
A page opens for creating phone numbers/ranges for the call restrictor in question.
7. Click New.
8. In the Phone number / range entry field, enter the phone number/range.
9. Enter the name of the corresponding phone number in the Name entry field.
10. Click Save.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Restrictor (outgoing) – Restricted Numbers
Creating a Call Restrictor (Outgoing)
Functions
467