Presenting The Tones; Configuring The Internal Dial Tone - Auerswald COMpact 4000 Operation Manual

Presenting the Tones

The tones are signaled as follows:

Configuring the Internal Dial Tone

The user hears the internal dial tone after picking up the receiver or after pressing the FLASH
or query key if a line is available. It is then possible to dial a phone number.
Proceed as follows:
• Separately for subscribers
• Using the configuration manager
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Settings
• For user: Subscriber Properties > Settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Internal dial tone list field under Signallisation by tones, select one of the
following options:
1 x long: Continuous tone
3 x short: 3 Double tones, approx. 1 second pause, ...
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Tones
Presenting the Tones
669