Compact 4000 Interface Board Overview - Auerswald COMpact 4000 Operation Manual

Installation and Commissioning
Preparation (Modules)

COMpact 4000 Interface Board Overview

COMpact 4000 Interface Board Overview
A USB socket for connection of storage media or a single external printer
B RJ-45 socket (Ethernet port) for connection to a PC or a network
C Earth terminal
D Altern. button to restore the firmware installed before a firmware update
E Default button to restore the factory settings
F Eight times two terminal clamps for the connection of analogue end devices to the
eight internal analogue ports
G Reset button to restart the PBX
H Two times four terminal clamps for the direct connection of ISDN end devices to
the two internal S
S ports (only the two inner terminal clamps are used at the U
0
54
/U ports or for the connection of NTBAs to the two external
0 P0
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
port)
P0