Ringing Sequence; More Information On The Ringing Sequences - Auerswald COMpact 4000 Operation Manual

Ringing Sequence

It may not be always useful, e.g., in a service centre, for all the telephones logged into a group
to ring simultaneously. To solve this problem, a ringing sequence can be configured.

More Information on the Ringing Sequences

The ringing sequence is created by the following settings:
A. All: All subscribers logged into the group ring simultaneously. It is possible to configure
a delayed ringing for selected subscribers. These subscribers start to ring after the
delay. Moreover, if the subscribers are busy and their call waiting function is enabled,
all subscribers will hear knocking. The call is terminated by the network provider
(usually after 120 sec.). If CF on no response was configured, the group call is finished
after the configured delay time and the CF destination is called instead.
B. Linear: All members logged into the group ring directly one after the other for a
configured time. For one call, only one telephone rings at a time. A busy subscriber is
skipped and the next subscriber in line is called. If CF on no response was configured,
the group call is finished after the configured delay time and the CF destination is
called instead.
C. Adding: All members logged into the group start to ring delayed by a configured time
one after the other. A busy subscriber is skipped and the next subscriber in line is
called. If CF on no response was configured, the group call is finished after the
configured delay time and the CF destination is called instead.
a. fixed: The order telephones are called depends on the assigned priority.
b. balancing: The order telephones are called is managed by a dynamic priority
list. After each accepted call, the corresponding telephone is moved to the last
position in line.
x. rotating: After the first loop (all logged-in telephones have been/are
ringing) is complete, it is started again. In the second loop, the busy
subscribers hear knocking. The call is terminated by the network
provider (usually after 120 sec.).
_. without rotating: After the first loop (all logged-in telephones have been/are
ringing) is complete, the call is disconnected. Busy subscribers hear no
knocking.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Ringing Sequence
More Information on the Ringing Sequences
Functions
349