Configuring The Fax Transmission - Auerswald COMpact 4000 Operation Manual

Number in the format: +[country prefix][city code][external number], e. g.
+495306920094
Note: Recipients of a fax frequently send their responses to the number
entered in the header of the fax. Therefore, the number under Fax ID (phone
number), should be one of your own extensions/phone numbers with fax
acceptance.

Configuring the Fax Transmission

If EMC error correction is enabled, transmission errors occurring during the transmission (e. g.
because of faulty lines) will be corrected provided that EMC operation (Error Correction Mode)
has also been configured for the opposite end. If transmission errors occur very often (e. g.
overseas lines of VoIP connections with frequent packet losses), the transmission cannot be
carried out since the fax machines involved will cancel the transmission due to an excessive
number of transmission repetitions. In such cases, it may be sensible to disable EMC error
correction. Without EMC error correction, the transmission errors occurred will be displayed as
erroneous dots or lines.
Proceed as follows:
• Separately for fax boxes
• Using the configuration manager
Requirements:
• Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
1. Open the page Devices > Voice mail/fax boxes > Properties > Box settings.
2. In the list field at the top, select the fax box in question according to the name or
number.
3. Select or clear the EMC error correction check box under Fax transmission.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Voice Mail and Fax Boxes
Fax Box
Configuring the Fax Transmission
267