Inserting A Restoration Point For Configuration Data - Auerswald COMpact 4000 Operation Manual

Service and Maintenance
Backing Up and Recovering Configuration Data

Inserting a Restoration Point for Configuration Data

- Names of internal subscribers
- Passwords of PBX, subscribers, VoIP accounts and VoIP subscribers
- Address books of the PBX
- Connection data sets with destination, source, and time information of a
telecommunication connection
Before the data backup is being saved, all subscribers to the PBX must be
informed that these contents will be forwarded. They must also be informed
about who will use the data received.
It is absolutely necessary to store the data safely and in accordance with the
legal requirements.
If you want to make the data backup available to your specialised dealer or
to the manufacturer for error analysis, you must make sure that the legal
requirements are fulfilled.
Proceed as follows:
• Using the configuration manager
1. Open the page Administration > Data backup.
2. Select or clear the check boxes of the data to be stored under READ CONFIGU-
RATION DATA FROM THE PBX.
3. Click Read from PBX under READ CONFIGURATION DATA FROM THE PBX.
4. Accept the legal notes by entering
5. Click Data backup.
6. Save the configuration file on the PC.
Inserting a Restoration Point for Configuration Data
Proceed as follows:
• Using the configuration manager
1. Open the page Administration > Data backup.
2. Click Insert restoration point.
714
ok in the entry field.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016