Auerswald COMpact 4000 Operation Manual page 106

Introduction to the Configuration Manager
Configuration Manager
Operating Instructions for the Configuration Manager
The table will be sorted according to the entries in the relevant column in
ascending order.
The table will be sorted according to the entries in the relevant column in
descending order.
Note:
To reverse the sorting sequence, click again in the column heading.
If no arrow appears then the column cannot be used as a sorting criteria.
Symbols and Highlightings
Line at the bottom of the configuration manager
Adds an empty table row.
Saves the changes in the table row.
Deletes the selected table row(s).
Imports a vCard.
Imports data.
Exports data.
Opens a window for copying settings.
Updates the data of the displayed page.
Carries out the desired action (e. g. Set credit, Standard for restoring the
default settings).
Prints a table (e.g. Call data list) or test page.
Some functions or resources will need to be released or extended via PBX
dongle (see page Administration > Dongle releases).
For extendable functions 3 digits appear after the dongle symbol (e.g. 31/100/
112). The first digit (31 in the example) shows the currently configured
number,the second number (100 in the example) the released number and
the third number (112 in the example) the maximum possible number to be
released via Dongle.
Configuration pages
Opens the Help page for the corresponding setting point.
Placing the cursor over the symbol displays or hides information about the
corresponding Help topic (tooltip).
106
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016