Auerswald COMpact 4000 Operation Manual page 645

Proceed as follows:
• Separately for configurations
• Seperately for external connections
• Using the configuration manager
Creating Call Distribution on the PTMP Connection
Requirements:
• External S port, VoIP account (optional, see chapter Important Information > Product
0
Details > Basic Assembly and Extensions)
• Configured connection type PTMP connection
• Entered multiple subscriber numbers
• Created internal destinations (subscribers, groups, voice mail/fax boxes or automatic
reception)
1. Open the page Public switched tel. networks > Call distribution.
If several configurations (PBX profiles) have been created, these will be available as
tabs.
2. With several configurations: Click the tab with the desired configuration.
3. In the first CALL DISTRIBUTION FOR... list field, select ISDN PTMP connections
or VoIP PTMP connections.
4. In the second CALL DISTRIBUTION FOR... list field, select the connection in
question.
5. In the Internal no. | name list fields, select one of the following options:
Fallback: The caller is transferred to the fallback function.
Internal number: The caller will be transferred to the selected internal number
(subscriber, group, voice mail/fax box or automatic reception).
Note: External numbers, e.g., those used as remote switching/programming
numbers or call through numbers, may not be used in the call distribution.
6. Click Save.
7. Repeat step 4 to 6 to configure the call distribution for the other PTMP connections.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Call Distribution
Creating a Call Distribution
645