Auerswald COMpact 4000 Operation Manual page 350

Functions
Ringing Sequence
More Information on the Ringing Sequences
y. Split Group: During the call phase, the group needs to be reachable for
further callers. Group splitting makes sure that approximately the same
number of subscribers is available for each of the upcoming calls.
_. without Split Group: A second caller hears the busy signal (only
possible for All).
Examples
Below are example of calls illustrating the possible options. The following parameters are
common to all examples:
• Number of telephones logged in: 4
• Configured time: 20 seconds
• Priority order: T1, T2, T3, T4
• Ringing delay for ringing sequence All: enabled for T3
• CF delay time for CF on no Reply: 20 seconds
A. All
(like All - Split Group, but a second caller hears the busy signal)
350
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016