Auerswald COMpact 4000 Operation Manual page 564

Settings
Analogue Connection
Expert Configuration, Analogue Connection
CLIP sub-version
The CLIP sub-version specifies when the analogue network provider sends the CLIP infor-
mation.
No evaluation of CLIP information: The data sent by the network provider is not forwarded
to the internal subscriber.
Amplification (0 to +25 dB)
CLIP information amplification specifies the number of decibels by which the PBX increases or
reduces all the audio signals when CLIP information is being received.
Control Commands
Suppress a phone number (CLIR)
Initiate callback when busy (CCBS)
Enable CF immediately (CFU)
Disable CF immediately (CFU)
Enable CF when busy (CFB)
Disable CF when busy (CFB)
Enable CF if no response (CFNR)
Disable CF if no response (CFNR)
The control commands specify the character strings the analogue network provider requires to
execute a service feature on the analogue connection. If a service feature is requested on one
of the PBX's ISDN subscribers (e.g. system telephone), the PBX automatically converts it into
the character strings required for the analogue network provider.
Possible entries:
• Digits: 0 to 9
• The * and # characters
• n as a wildcard for the phone number
• , (comma) for a one second pause
• R as a wildcard for a flash
564
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016