Auerswald COMpact 4000 Operation Manual page 727

You cannot use call forwarding to divert this phone number.
You must select the DDI number to be sent for a PTP connection from the
extensions block. If the DDI number is then displayed in red text, either it is
not in the value range, or the maximum number of external phone numbers
has already been entered.
AUTHORISATION FOR REMOTE CONFIGURATION
Dealer access number X
Specifies the connection from which the PBX can be configured remotely without manual
release. To do this, the PC connected to the PBX via an external ISDN connection must send
the dealer access number that is entered here.
Notes:
Enter the phone number along with its local area code.
If you do not enter a dealer access number, or if the transmitted number does
not match the number you enter, you must dial a character string on an
internal telephone to unlock the PBX for remote configuration.
REMOTE CONFIGURATION OF SYSTEM TELEPHONES
Remote switching number call no:
Requirements:
• External numbers have been entered
---: no remote switching number.
The system telephone remote switching number is used to set up an external ISDN connection
using the COMfortel Set configuration software.
Notes:
You cannot use call forwarding to divert this phone number.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Remote Configuration and Alternative Connection Options
Remote Configuration Settings
Service and Maintenance
727