Creating Switching Times For Switching The Wake-Up Announcement - Auerswald COMpact 4000 Operation Manual

always
Multiple wake-up calls are enabled. If a wake-up call is enabled, it is made for the duration
of the specified time, until the user switches it off.
Single wake-up call is enabled. A wake-up call is made once, then switched off automatically.
Note: assuming you set up the wake-up time "Monday to Friday at 07.30" on
your telephone. If you enable the wake-up call on Sunday evening for "single
wake-up", you will be woken at 07.30 on the following Monday morning. The
wake-up call is then switched off automatically. However, if you enable the
same wake-up call for "multiple wake-up", you will be woken at 07.30 on
Tuesday to Friday mornings (every week, until you disable the wake-up call
again).
enabled
Wake-up call is switched on and will be made on the next possible date.
New
Adds a new wake-up time.
Note: A maximum of 20 wake-up times can be configured per subscriber.
Delete
Deletes the entries marked in the list.

Creating Switching Times for Switching the Wake-up Announcement

To switch wake-up announcements on and off depending on the time of day, different switching
times can be created.
Proceed as follows:
• Separately for configurations
• Using the configuration manager
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Creating Switching Times for Switching the Wake-up Announcement
Functions
Wake-up Functions
517