Auerswald COMpact 4000 Operation Manual page 683

Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Controlling of the PBX via telephone check box.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Protection from Unauthorised Access
Switching Authorisation for Controlling the PBX On/Off
Settings
683