Auerswald COMpact 4000 Operation Manual page 542

Settings
Internal Telephone Numbers
Creating ISDN Subscribers
Proceed as follows:
• Using the configuration manager
Requirements:
• Internal S port (optional, see chapter Important Information > Product Details > Basic
0
Assembly and Extensions)
1. Open the page Subscriber (scr.) > Phone numbers.
2. Click New.
3. Enter a new internal number in the from entry field. Possible entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under from ... until.
4. Enter a name for identification purposes in the Name entry field.
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. In the Module / Port list fields, select the module and the port to which the end device
is connected.
6. In the Device type list field, select one of the following options depending on the
device connected:
542
10 to 9999
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016